12L G3 Short Path Distillation Kit

Description

• Fully peer-reviewed system with certifications on electrical parts
• Single head, full-bore configuration for each system – promotes molecular flow, reduces operating temperature, and gives users increased ease-of-use compared to multi-head configurations
• Custom-cut ground glass drip tips – eliminate grease contamination and allow distillate to drip directly into the receiving flask
• All collection joints have been increased to 29/42 (29 mm) – to reduce potential clogging
• Condenser length has been extended for increased surface area and to accommodate larger collection flasks
• Improved heating mantle system with digital temperature and stir control
• Dual Temperature Monitoring allows the user to monitor temperature from two separate areas on the system such as the distillation head and cold trap, which improves thermal efficiency throughout the system, and allows for more producibility between runs
• Integrated supports built into each mantle – to make setup easy
• Full lattice rack included with each kit
• Reinforced mantle base – increases stability, dampens vibration, and provides better alignment for the whole system
• Improved glassware connections – utilizing ground glass joint to KF25 adapters for maximum vacuum capability and leak reduction
• Pinched thermocouple adapters for easy removal
• 1 year EliteLab® subscription included with each kit
• Angled vacuum take-off valves – for both the swingarm and secondary collection port which allows for isolation from the rest of the system as well as unlimited fraction collection
• Secondary, liquid-cooled “cold finger” condenser – for greater condensation efficiency
• Jacketless primary condenser – for increased flow; keeps volatiles in vapor state for collection away from the main body fraction
• All improvements and features from G3 series
• 150mm Reactor Flange distillation head (LS-DH-150HE) with 100mm distillation column
• Distillation head inserts (2):
• Evacuated, Vigreux-indented insert
• Temperature-controllable fluid-filled finger insert
• Evacuated, Vigreux-indented insert
• Temperature-controllable fluid-filled finger insert
• Evacuated, Vigreux-indented insert
• Temperature-controllable fluid-filled finger insert
• Fiberglass Insulator to retain radiant heat in space between silvered jacket and heating mantle system
• Secondary Cold Finger Condenser (LS-A90-VC45) for use with jacketless condenser, hot condenser, or high-efficiency fraction collection within the system
• Angled Isolation Valves:
• Inline distribution adapter (swing arm/primary collection) valve with vacuum release for unlimited fraction collection
• Distribution receiver (secondary collection) valve with vacuum release for unlimited fraction collection
• Inline distribution adapter (swing arm/primary collection) valve with vacuum release for unlimited fraction collection
• Distribution receiver (secondary collection) valve with vacuum release for unlimited fraction collection
• Inline distribution adapter (swing arm/primary collection) valve with vacuum release for unlimited fraction collection
• Distribution receiver (secondary collection) valve with vacuum release for unlimited fraction collection
• Modular Condenser Kit (MCK)
• Hot Condenser Mantle Kit (HCK)
• Complete System:
• Peer-Reviewed, GMP Compliant
• Peer-Reviewed, GMP Compliant
• Heating Mantles:
• CSA
• CAN/CSA C284101, C22.2 No. 88
• CSA
• CAN/CSA C284101, C22.2 No. 88
• Peer-Reviewed, GMP Compliant
• CSA
• CAN/CSA C284101, C22.2 No. 88
• Temperature Controller:
• NRTL, QPS, CE, Constructed with 100% UL and CSA listed parts.
• UL 61010-1; 61010-2-201
• CAN/CSA 61010-1, C22.2
• NRTL, QPS, CE, Constructed with 100% UL and CSA listed parts.
• UL 61010-1; 61010-2-201
• CAN/CSA 61010-1, C22.2
• NRTL, QPS, CE, Constructed with 100% UL and CSA listed parts.
• UL 61010-1; 61010-2-201
• CAN/CSA 61010-1, C22.2
• Temperature Monitor:
• CE, Constructed with 100% UL and CSA listed parts.
• CE, Constructed with 100% UL and CSA listed parts.
• Stir Controller:
• CE, Constructed with 100% UL and CSA listed parts.
• CE, Constructed with 100% UL and CSA listed parts.
• Vacuum Monitor:
• RoHS / CE / NRTL
• RoHS / CE / NRTL
• Glassware:
• Meets ASTM specification E438, type 1, class A, Kimble Kimax or Schott Duran Glass
• Meets ASTM specification E438, type 1, class A, Kimble Kimax or Schott Duran Glass
• CE, Constructed with 100% UL and CSA listed parts.
• CE, Constructed with 100% UL and CSA listed parts.
• RoHS / CE / NRTL
• Meets ASTM specification E438, type 1, class A, Kimble Kimax or Schott Duran Glass
• Documentation & SOPs for GMP integration
• Electronic controllers & monitors
• Glassware, supports, & clamps
• Technical Support & Warranties
• LS Evacuated, Structured Head Insert
• LS Cold Finger Head Insert
• LS Fiberglass Insulator for Distillation Head
• LS Jacketless Condenser
• LS 90° Adapter with Vertical Condenser
• LS Swing Arm with Angled Take-Off Valve
• LS Distribution Adapter with Angled
• Take-Off Valve
• TCM (Temperature Controller/Monitor)
• DTM-1 (Digital Temperature Monitor)
• PVM-2 (Precision Vacuum Monitor – Dual)
• DSC-1 (Digital Stir Controller)